CentOS 5.5 x86 64 Hypervisor Edition (Minimal)

From WBITT's Cooker!

(Difference between revisions)
Jump to: navigation, search
m (What does this CD provide)
(Download the ISO)
Line 1,111: Line 1,111:
[[File:Test-hypervisor-Virtual Machine-4.png]]
[[File:Test-hypervisor-Virtual Machine-4.png]]
-
==Download the ISO==
+
==Download the ISO (473 MB)==
-
Built on: 04 Jan 2011
+
Built on: 04 Jan 2011  
-
http://downloads.wbitt.com/downloads/CentOS-5.5-x86_64-HypervisorEdition.iso
+
http://downloads.wbitt.com/downloads/CentOS-5.5-x86_64-HypervisorEdition.iso <b>(473 MB)</b>
MD5SUM  : adae0a1dd92adcf52caf1afd7104c0b3
MD5SUM  : adae0a1dd92adcf52caf1afd7104c0b3
SHA1SUM : a08c200d97f700025d33ee848384a8d573510453
SHA1SUM : a08c200d97f700025d33ee848384a8d573510453

Revision as of 07:28, 5 January 2011

Author: Muhammad Kamran Azeem (kamran _at_ wbitt _dot_ com)

Created: 04 Jan 2011

Last Revised: 04 Jan 2011

It started, when I developed an itch to have a CENTOS 5.5 ServerCD, so I could setup my Physical and Vitual Machines, quickly. However CENTOS website does not provide one. It provides a live CD, which was of no use to me. And I was not in a mood (nor could afford) to download full 4.x GB of DVD. This desire to have a CENTOS ServerCD, changed to create a (minimalistic) Hypervisor CD, when I noticed RedHat's virtualization solution, RHEV, or, RedHat Enterprise Virtualization. RHEV is a slim/cut down version of RHEL 6, working as a KVM Hypervisor, with a very small install foot-print. I noticed that it is a similar concept as Citrix XEN Server. If I can make such a CD / custom-distribution, I can use it to install the bare-minimum set of hypervisor packages (XEN or KVM) on my physical machines. Then, I can use the same CD to install a minimalistic (core) installation of a guest OS on the VMs I would create.

So, you can say, I was in competition with RedHat! :) I succeeded in my minimalistic Hypervisor approach, even if I got exceeded by a few (hundred) megabytes, compared to RedHat. Below is how I did it.

Note: You can refer to my other article Tiny CentOS 5.5 32 bit (i386), for more details and detailed steps. However, in this article, I have further simplified the steps. You no longer need to copy one RPM at a time to a temporary directory and test install it. Using "yumdownloader" is the easiest method. And the most important is that you no longer have to have a local repository of the full DVD. With the method below, you can pull everything directly from the internet. i.e. from the CENTOS websote (centos.org).

Contents

Benefits - Why a Hypervisor CD (Server CD) in the first place?

Well, the key benefits are:

  • centos.org does not provide a server CD for centos 5.5. That is a good enough reason to create one ourselves, in the first place.
  • Small ISO size, makes it easier and ideal to download, even in bandwidth/volume limited environments.
  • Less packages means, less vulnerabilities (if you decide to use it in production). Less holes to exploit.
  • Less packages to update, when any updates are released from upstream vendor. This results in faster update of the system. And low bandwidth consumption. In case you have a farm of such "thin" servers, lesser bandwidth/volume would be needed to update all of the servers in your farm, compared to fat/thick installations.
  • Delivers you SSH and YUM, so you can add anything you want, on top of it.
  • Creates a very small (534 MB ~ 7504MB) foot print on the disk (depending on your package selection). The Virtual machines, can now be assigned virtual disks, as low as 1.5 GB in size (tested) , or 1.0 GB in size (not tested yet).
  • Based on point above, multiple small VMs can be created in a disk constrained physical machine. 10 Virtual Machines would roughly consume about 15 GB of space.
  • Once it is installed on a VM and rebooted, you can change the memory assignment to the VM, lowering it to 64 MB. And it will still work! (tested).
  • Ideal for clusters of any size.

What does this CD provide

Although the actual CD is created in the steps listed farther below, still it would be appropriate to list it's key software packages.

  • YUM, wget, FTP client
  • VI editor (vim-minimal)
  • DHCP client
  • SSH Server and SSH client
  • SELinux
  • IP Tables
  • nmap, tcpdump, wireshark, iptraf, traceroute, etc.
  • XEN Hypervisor
  • KVM Hypervisor
  • virt-viewer, virt-manager
  • VNC Server
  • Basic X Window System with TWM (Tom's Window Manager) and XTERM

Infrastructure

Physical Host

The physical host is a Fedora 14 machine, with 4 GB RAM, and 200 GB of disk. Out of which about 70 GB is free space.

The disk has a directory /data/cdimages , which hosts various ISO images of different OS, I have. This directory has the following layout (only the part interesting to us is shown below).

[root@fedora14 cdimages]# tree -d
.
├── CentOS-5.5-x86_64
│   ├── CentOS
│   ├── images
│   │   ├── pxeboot
│   │   └── xen
│   ├── isolinux
│   ├── NOTES
│   └── repodata
└── CentOS-5.5-x86_64-hypervisor

The /data/cdimages/CentOS-5.5-x86_64 is the full DVD copied in this directory. If you cannot afford to download full DVD, (for perfectly understandable reasons), you can download the packages, directly from the CENTOS website. The method to do so, is already mentioned here: http://cooker.wbitt.com/index.php/CENTOS_Server_CD_project#Creating_the_.22core.22_install-tree_from_a_http_site

The /data/cdimages/CentOS-5.5-x86_64-hypervisor directory shown above, is an empty directory. It is possible that you don't have this directory created at this moment. We can create this directory at a later stage.

The directory /data/cdimages on the physical host, is made available as an NFS writeable share to the 192.168.122.0/24 network. As following:

[root@fedora14 cdimages]# cat /etc/exports
/data/cdimages 192.168.122.0/255.255.255.0(rw,no_root_squash)
[root@fedora14 cdimages]#

[root@fedora14 cdimages]# service nfs restart 

(Make sure that the firewall is not blocking incoming NFS requests on the physical host).

This is a good method to save space, both on the physical host and on the VMs. That means, you don't have to "fill-up" your build host (VM) will all the DVD/RPM files and ISO images. So they don't need large virtual disks for it. All of the work, can be performed, when we mount this directory /data/cdimages, from the physical host, to the buildhost-64 VM.

The physical host has the IP: 192.168.122.1 , on the virbr0 interface. It may (or may not) have any IP on it's eth0 interface, which is irrelevant to this text.

Build Host

The buildhost (named buildhost-64) is actually a CentOS 5.5 64 bit (x86_64) Virtual Machine, running inside a Fedora 14 physical host. It is installed with the minimal installation available with default CENTOS installer. It has additional packages installed on it, which are:

[root@buildhost-64 ~]# yum -y install anaconda anaconda-runtime mkisofs cdrecord

The BuildHost has only 512 MB Virtual Memory, and 4GB Virtual Disk. We basically do not need much disk space on the build host. The space is needed to pull the RPMs using "yumdownloader" command. The BuildHost (VM) has the IP: 192.168.122.229, on its eth0 interface.

Steps

Make the repositories available on the buildhost-64

See if you are able to view the NFS share made available on the physical host.

[root@buildhost-32 ~]# showmount -e 192.168.122.1
Export list for 192.168.122.1:
/data/cdimages 192.168.122.0/255.255.255.0

Create a mount point on the build host, and mount the NFS share on it.

[root@buildhost-64 ~]# mkdir /mnt/cdimages

[root@buildhost-64 ~]# mount -t nfs 192.168.122.1:/data/cdimages/  /mnt/cdimages/

[root@buildhost-64 ~]# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/vda1             3.8G  913M  2.8G  34% /
tmpfs                 252M     0  252M   0% /dev/shm
192.168.122.1:/data/cdimages/
                      191G  113G   69G  63% /mnt/cdimages
[root@buildhost-64 ~]# 

As you can see, the /data/cdimages from the physical host is now available on our buildhost-64, as /mnt/cdimages.

Create an empty directory CentOS-5.5-x86_64-hypervisor inside /mnt/cdimages, if not already done so. It must be empty though. This directory is going to hold our new custom distribution.

[root@buildhost-64 ~]# mkdir /mnt/cdimages/CentOS-5.5-x86_64-hypervisor

Copy the DVD structure, (excluding the CentOS directory), from /mnt/cdimages/CentOS-5.5-x86_64/ to this newly created directory /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/.

[root@buildhost-64 ~]# rsync -av --exclude CentOS/  \
   /mnt/cdimages/CentOS-5.5-x86_64/   /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/

Without the CentOS directory, which holds all the RPMs of the distribution, the structure (with some necessary files), is about 226 MB in total.

[root@buildhost-64 ~]# du -sh /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/
226M	/mnt/cdimages/CentOS-5.5-x86_64-hypervisor/

I created temporary directories named /tmp/transitRPMs and /tmp/RPMtest. /tmp/transitRPMs will hold the RPMs pulled by yumdownloader. /tmp/RPMtest will be used to test the RPMs. This is optional, because it doesn't make much sense after the packages are downloaded using yumdownloader, which checks for dependencies itself. Note: We cannot use directories created inside NFS mounts to use with RPM, or YUM, or YUMDOWNLOADER. Thus it is important to have a directory created on the local filesystem for both pulling the RPMs and testing them.

[root@buildhost-64 tmp]# mkdir /tmp/transitRPMs

[root@buildhost-64 tmp]# mkdir /tmp/RPMtest

Pulling the necessary RPMs

Note: The transitRPMs (or whatever name you chose for it), must not be on an NFS share. I found problems getting RPM and YUM to work inside NFS mounts.

[root@buildhost-64 tmp]# yum -y install yum-utils

Simple way to pull the the required RPM, along it's dependencies, is to use YUMDOWNLOADER (part of yum-utils package). The other (manual) method is to of-course copy the files one at a time, to the /tmp/transitRPMs directory. (Not very appealing of-course).

Here is how to pull just the kernel and all of it's related dependencies.

[root@buildhost-64 tmp]# yumdownloader  --destdir=/tmp/transitRPMs/  --installroot=/tmp/transitRPMs/ --resolve kernel
. . . 
. . . 
--> Processing Dependency: libk5crypto.so.3()(64bit) for package: openssl
--> Running transaction check
---> Package krb5-libs.x86_64 0:1.6.1-36.el5_4.1 set to be updated
--> Processing Dependency: libkeyutils.so.1(KEYUTILS_0.3)(64bit) for package: krb5-libs
--> Processing Dependency: libkeyutils.so.1()(64bit) for package: krb5-libs
--> Running transaction check
---> Package keyutils-libs.x86_64 0:1.2-1.el5 set to be updated
--> Finished Dependency Resolution
. . . 
. . . 
kernel-2.6.18-194.el5.x86_64.rpm                                                                                                      |  19 MB     00:00     
device-mapper-multipath-0.4.7-34.el5.x86_64.rpm                                                                                       | 3.0 MB     00:00     
libsysfs-2.0.0-6.x86_64.rpm                                                                                                           |  45 kB     00:00     
iputils-20020927-46.el5.x86_64.rpm                                                                                                    | 131 kB     00:00     
libstdc++-4.1.2-48.el5.x86_64.rpm                                                                                                     | 352 kB     00:00     
libacl-2.2.39-6.el5.x86_64.rpm                                                                                                        |  19 kB     00:00     
libcap-1.10-26.x86_64.rpm                                                                                                             |  23 kB     00:00     
cpio-2.6-23.el5_4.1.x86_64.rpm                                                                                                        | 122 kB     00:00     
filesystem-2.4.0-3.el5.x86_64.rpm                                                                                                     | 1.0 MB     00:00     
nash-5.1.19.6-61.x86_64.rpm                                                                                                           | 1.1 MB     00:00     
binutils-2.17.50.0.6-14.el5.x86_64.rpm                                                                                                | 2.9 MB     00:00     
SysVinit-2.86-15.el5.x86_64.rpm                                                                                                       | 117 kB     00:00     
bash-3.2-24.el5.x86_64.rpm                                                                                                            | 1.9 MB     00:00     
libselinux-1.33.4-5.5.el5.x86_64.rpm                                                                                                  |  77 kB     00:00     
db4-4.3.29-10.el5.x86_64.rpm                                                                                                          | 898 kB     00:00     
[root@buildhost-64 tmp]# 
[root@buildhost-64 tmp]# ls /tmp/transitRPMs/*.rpm | wc -l
82

[root@buildhost-64 tmp]# du -sh /tmp/transitRPMs/ 
104M	/tmp/transitRPMs/

Of-course, the above is minimal most as it can get. It will give you a login prompt and shell access. But you won't have yum, wget, ftp, etc. And, you have to assign IP as well yourself. However this can be ideal for testing multiple machines, just to test availability over the network. But again, nothing fancy.

To get all the packages we need, for our "HypervisorEdition", below is what all I pulled.

[root@buildhost-64 ~]# yumdownloader  --destdir=/tmp/transitRPMs/  --installroot=/tmp/transitRPMs/ --resolve kernel \ 
vim-minimal wget yum dhclient grub rootfiles openssh-clients openssh-server \ 
iptables selinux-policy-targeted setools kernel-xen telnet tcpdump wireshark nmap \ 
zip bzip2 rsync which traceroute ftp vixie-cron iptraf vnc-server \ 
xen kvm kvm-tools virt-viewer virt-manager xterm \ 
xorg-x11-xinit xorg-x11-server-Xorg xorg-x11-twm xorg-x11-xdm bitmap-fonts desktop-backgrounds-basic \ 
xorg-x11-drivers xorg-x11-fonts-75dpi xorg-x11-fonts-100dpi xorg-x11-fonts-ISO8859-1-75dpi \ 
xorg-x11-fonts-ISO8859-1-100dpi xorg-x11-fonts-misc xorg-x11-fonts-truetype xorg-x11-fonts-Type1 
[root@buildhost-64 tmp]# ls /tmp/transitRPMs/*.rpm | wc -l
371

[root@buildhost-64 tmp]# du -sh  /tmp/transitRPMs/
275M	/tmp/transitRPMs/

Test the installation of pulled RPMs (for the sake of completeness)

I use the testrun.sh script, shown in the scripts section below, to test the installation of RPMs, which were pulled just now using yumdownloader. You have to edit the script to specify correct locations of the RPMTEST variable.

[root@buildhost-64 tmp]# ./testrun.sh /tmp/transitRPMs/
warning: /tmp/transitRPMs//alsa-lib-1.0.17-1.el5.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID e8562897
Preparing...                ########################################### [100%]
[root@buildhost-64 tmp]# 

No errors here. This means that the test installation of the RPMs was successful. Good.

Synchronize the transitRPMs location with the build-tree

Once the test is successful, you can rsync this (transitRPMs) directory to your buildtree (/mnt/cdimages/CentOS-5.5-x86_64-hypervisor).

Create the CentOS directory in your build directory, if you have not created it already. It should be empty at this point.

[root@buildhost-64 tmp]# mkdir /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/CentOS

Now sync the directory.

[root@buildhost-64 tmp]# rsync -av  /tmp/transitRPMs/ /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/CentOS/
building file list ... done
. . . 
. . . 
xorg-x11-xinit-1.0.2-15.el5.x86_64.rpm
xorg-x11-xkb-utils-1.0.2-2.1.x86_64.rpm
xterm-215-8.el5_4.1.x86_64.rpm
xz-libs-4.999.9-0.3.beta.20091007git.el5.x86_64.rpm
yum-3.2.22-26.el5.centos.noarch.rpm
yum-fastestmirror-1.1.16-14.el5.centos.1.noarch.rpm
yum-metadata-parser-1.1.2-3.el5.centos.x86_64.rpm
zip-2.31-2.el5.x86_64.rpm
zlib-1.2.3-3.x86_64.rpm

sent 284376910 bytes  received 8188 bytes  11607555.02 bytes/sec
total size is 284309498  speedup is 1.00
[root@buildhost-64 tmp]#

Edit the comps.xml file as per requirements

I pulled a copy of original comps.xml from the original CENTOS repository. Removed all the "xml:lang" lines from it. Also removed all un-necessary groups and categories from it. Modified contents of the groups: core, base, xen and kvm. Below is the minimal version of comps.xml, for my CENTOS 5.5 64 bit Hypervisor Edition.

[root@buildhost-64 tmp]# cat comps.xml-hypervisor
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE newcomps PUBLIC "-//CentOS//DTD Comps info//EN" "comps.dtd">
<comps>

  <group>
    <id>base</id>
    <name>Base</name>
    <description>This group includes a minimal set of packages, inclusding X.</description>
    <default>false</default>
    <uservisible>true</uservisible>
    <packagelist>
      <packagereq type="default">vim-minimal</packagereq>
      <packagereq type="default">grub</packagereq>
      <packagereq type="default">openssh-clients</packagereq>
      <packagereq type="default">openssh-server</packagereq>
      <packagereq type="default">dhclient</packagereq>
      <packagereq type="default">rootfiles</packagereq>
      <packagereq type="default">iptables</packagereq>
      <packagereq type="optional">kernel-xen</packagereq>
      <packagereq type="default">telnet</packagereq>
      <packagereq type="default">tcpdump</packagereq>
      <packagereq type="default">nmap</packagereq>
      <packagereq type="optional">wireshark</packagereq>
      <packagereq type="default">zip</packagereq>
      <packagereq type="default">bzip2</packagereq>
      <packagereq type="default">rsync</packagereq>
      <packagereq type="default">which</packagereq>
      <packagereq type="default">traceroute</packagereq>
      <packagereq type="default">ftp</packagereq>
      <packagereq type="default">vixie-cron</packagereq>
      <packagereq type="optional">iptraf</packagereq>
      <packagereq type="default">setools</packagereq>
      <packagereq type="default">selinux-policy-targeted</packagereq>
      <packagereq type="default">selinux-policy</packagereq>
      <packagereq type="optional">vnc-server</packagereq>
      <packagereq type="optional">xterm</packagereq>
      <packagereq type="conditional" requires="xterm">xorg-x11-twm</packagereq>
      <packagereq type="conditional" requires="xterm">xorg-x11-xinit</packagereq>
      <packagereq type="conditional" requires="xterm">xorg-x11-xfs</packagereq>
      <packagereq type="conditional" requires="xterm">xorg-x11-server-utils</packagereq>
      <packagereq type="conditional" requires="xterm">xorg-x11-server-Xorg</packagereq>
      <packagereq type="conditional" requires="xterm">xorg-x11-xdm</packagereq>
      <packagereq type="conditional" requires="xterm">xorg-x11-drivers</packagereq>
      <packagereq type="conditional" requires="xterm">bitmap-fonts</packagereq>
      <packagereq type="conditional" requires="xterm">desktop-backgrounds-basic</packagereq>
      <packagereq type="conditional" requires="xterm">xorg-x11-fonts-75dpi</packagereq>
      <packagereq type="conditional" requires="xterm">xorg-x11-fonts-100dpi</packagereq>
      <packagereq type="conditional" requires="xterm">xorg-x11-fonts-ISO8859-1-75dpi</packagereq>
      <packagereq type="conditional" requires="xterm">xorg-x11-fonts-ISO8859-1-100dpi</packagereq>
      <packagereq type="conditional" requires="xterm">xorg-x11-fonts-misc</packagereq>
      <packagereq type="conditional" requires="xterm">xorg-x11-fonts-truetype</packagereq>
      <packagereq type="conditional" requires="xterm">xorg-x11-fonts-Type1</packagereq>
      <packagereq type="conditional" requires="xterm">xorg-x11-xauth</packagereq>
    </packagelist>
  </group>

  <group>
    <id>core</id>
    <name>Core</name>
    <description>Smallest possible installation</description>
    <default>true</default>
    <uservisible>false</uservisible>
    <packagelist>
      <packagereq type="mandatory">SysVinit</packagereq>
      <packagereq type="mandatory">basesystem</packagereq>
      <packagereq type="mandatory">bash</packagereq>
      <packagereq type="mandatory">centos-release</packagereq>
      <packagereq type="mandatory">coreutils</packagereq>
      <packagereq type="mandatory">cpio</packagereq>
      <packagereq type="mandatory">e2fsprogs</packagereq>
      <packagereq type="mandatory">redhat-logos</packagereq>
      <packagereq type="mandatory">centos-release-notes</packagereq>
      <packagereq type="mandatory">filesystem</packagereq>
      <packagereq type="mandatory">glibc</packagereq>
      <packagereq type="mandatory">initscripts</packagereq>
      <packagereq type="mandatory">iproute</packagereq>
      <packagereq type="mandatory">iputils</packagereq>
      <packagereq type="mandatory">libgcc</packagereq>
      <packagereq type="mandatory">libtermcap</packagereq>
      <packagereq type="mandatory">mkinitrd</packagereq>
      <packagereq type="mandatory">procps</packagereq>
      <packagereq type="mandatory">readline</packagereq>
      <packagereq type="mandatory">rpm</packagereq>
      <packagereq type="mandatory">setup</packagereq>
      <packagereq type="mandatory">shadow-utils</packagereq>
      <packagereq type="mandatory">sysklogd</packagereq>
      <packagereq type="mandatory">termcap</packagereq>
      <packagereq type="mandatory">util-linux</packagereq>
      <packagereq type="mandatory">yum</packagereq>
      <packagereq type="mandatory">wget</packagereq>
    </packagelist>
  </group>


  <group>
    <id>xen</id>
    <name>Virtualization</name>
    <description>Virtualization Support with XEN</description>
    <default>false</default>
    <uservisible>true</uservisible>
    <packagelist>
      <packagereq type="default">kernel-xen</packagereq>
      <packagereq type="optional">libvirt</packagereq>
      <packagereq type="default">xen</packagereq>
      <packagereq type="optional">virt-manager</packagereq>
      <packagereq type="optional">virt-viewer</packagereq>
    </packagelist>
  </group>

  <group>
    <id>kvm</id>
    <name>KVM</name>
    <description>Virtualization Support with KVM</description>
    <default>false</default>
    <uservisible>true</uservisible>
    <packagelist>
      <packagereq type='default'>celt051</packagereq>
      <packagereq type='default'>etherboot-zroms</packagereq>
      <packagereq type='default'>etherboot-zroms-kvm</packagereq>
      <packagereq type='default'>kmod-kvm</packagereq>
      <packagereq type='default'>kvm</packagereq>
      <packagereq type='default'>kvm-qemu-img</packagereq>
      <packagereq type='default'>log4cpp</packagereq>
      <packagereq type='default'>qcairo</packagereq>
      <packagereq type='default'>qffmpeg-libs</packagereq>
      <packagereq type='default'>qpixman</packagereq>
      <packagereq type='default'>qspice-libs</packagereq>
      <packagereq type='default'>libvirt</packagereq>
      <packagereq type='optional'>etherboot-pxes</packagereq>
      <packagereq type='optional'>etherboot-roms</packagereq>
      <packagereq type='optional'>etherboot-roms-kvm</packagereq>
      <packagereq type='optional'>iasl</packagereq>
      <packagereq type='optional'>kvm-tools</packagereq>
      <packagereq type="optional">virt-manager</packagereq>
      <packagereq type="optional">virt-viewer</packagereq>
    </packagelist>
  </group>

  <category>
    <id>virtualization</id>
    <name>Virtualization</name>
    <description>Virtualization Support.</description>
    <display_order>93</display_order>
    <grouplist>
      <groupid>xen</groupid>
      <groupid>kvm</groupid>
    </grouplist>
  </category>

</comps>
[root@buildhost-64 tmp]#

You may want to run a sanity check on your comps.xml file. It will reveal any errors/typing mistakes, etc.

[root@buildhost-64 tmp]# xmllint --valid  comps.xml-hypervisor

Create the Repository

Use the script shown below in the scripts section to create the repository in your build directory. You have to edit the script to specify correct values for the variables used for COMPS.XML file.

[root@buildhost-64 tmp]# ./createrepo.sh /mnt/cdimages/CentOS-5.5-x86_64-hypervisor
Doing: rm -f /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/repodata/*
Doing: cp -v /tmp/comps.xml-hypervisor /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/repodata/comps.xml
`/tmp/comps.xml-hypervisor' -> `/mnt/cdimages/CentOS-5.5-x86_64-hypervisor/repodata/comps.xml'
Doing: createrepo -u media://1272326751.405938 -g /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/repodata/comps.xml /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/
371/371 - CentOS/libgnomeui-2.16.0-5.el5.x86_64.rpm                             
Saving Primary metadata
Saving file lists metadata
Saving other metadata
[root@buildhost-64 tmp]# 

Build the ISO file out of your build-tree

Time for the final step. Build the ISO. Use the buildiso.sh script shown in the scripts section below, to create the ISO. You have to edit the script to specify location and name of the ISO file.

[root@buildhost-64 tmp]# ./buildiso.sh /mnt/cdimages/CentOS-5.5-x86_64-hypervisor
INFO:	UTF-8 character encoding detected by locale settings.
	Assuming UTF-8 encoded filenames on source filesystem,
	use -input-charset to override.
mkisofs 2.01 (cpu-pc-linux-gnu)
Scanning /mnt/cdimages/CentOS-5.5-x86_64-hypervisor
Scanning /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/images
Scanning /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/images/pxeboot
Excluded: /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/images/pxeboot/TRANS.TBL
Scanning /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/images/xen
Excluded: /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/images/xen/TRANS.TBL
Excluded: /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/images/TRANS.TBL
Scanning /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/repodata
Excluded: /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/TRANS.TBL
Scanning /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/CentOS
Scanning /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/isolinux
Excluded: /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/isolinux/TRANS.TBL
Excluded by match: /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/isolinux/boot.cat
Using RPM_G000.;1 for  /RPM-GPG-KEY-CentOS-5 (RPM-GPG-KEY-beta)
Using RELEA000.;1 for  /RELEASE-NOTES-en (RELEASE-NOTES-en_US)
Using RELEA000.HTM;1 for  /RELEASE-NOTES-es.html (RELEASE-NOTES-en.html)
Using RELEA001.HTM;1 for  /RELEASE-NOTES-en.html (RELEASE-NOTES-en_US.html)
. . . 
. . . 
Using XORG_01V.RPM;1 for  /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/CentOS/xorg-x11-drv-digitaledge-1.1.0-1.1.x86_64.rpm (xorg-x11-drv-s3virge-1.9.1-2.1.x86_64.rpm)
Using XORG_01W.RPM;1 for  /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/CentOS/xorg-x11-drv-s3virge-1.9.1-2.1.x86_64.rpm (xorg-x11-fonts-75dpi-7.1-2.1.el5.noarch.rpm)
Writing:   Initial Padblock                        Start Block 0
Done with: Initial Padblock                        Block(s)    16
Writing:   Primary Volume Descriptor               Start Block 16
Done with: Primary Volume Descriptor               Block(s)    1
. . . 
. . . 
Writing:   Extension record                        Start Block 92
Done with: Extension record                        Block(s)    1
Writing:   The File(s)                             Start Block 93
  2.07% done, estimate finish Tue Jan  4 11:47:07 2011
  4.13% done, estimate finish Tue Jan  4 11:47:07 2011
  6.20% done, estimate finish Tue Jan  4 11:47:07 2011
  8.26% done, estimate finish Tue Jan  4 11:47:19 2011
 10.32% done, estimate finish Tue Jan  4 11:47:16 2011
. . . 
. . . 
 94.97% done, estimate finish Tue Jan  4 11:47:47 2011
 97.04% done, estimate finish Tue Jan  4 11:47:47 2011
 99.11% done, estimate finish Tue Jan  4 11:47:46 2011
Total translation table size: 103926
Total rockridge attributes bytes: 44898
Total directory bytes: 71680
Path table size(bytes): 98
Done with: The File(s)                             Block(s)    241935
Writing:   Ending Padblock                         Start Block 242028
Done with: Ending Padblock                         Block(s)    150
Max brk space used 84000
242178 extents written (473 MB)
[root@buildhost-64 tmp]#

Thats all. The ISO file is ready. Burn it on a CD, or use directly, or whatever suits you.

End of steps. The task of building the custom CENTOS ISO is successfully completed at this point.

Scripts used to test RPMs, create repo, and build ISO

testrun.sh (Used for testing a directory full of RPMs)

[root@buildhost-64 tmp]# cat testrun.sh 
#!/bin/bash
TESTDIR=$1
if [ "$TESTDIR" == "" ] ; then
  echo "You should provide the name of test directory containing RPMS. Please specify full path."
  exit 1
fi
RPMTEST="/tmp/RPMtest"
rpm --initdb --dbpath ${RPMTEST} 
rpm --test --dbpath ${RPMTEST} --root ${RPMTEST} -ivh ${TESTDIR}/*.rpm
[root@buildhost-64 tmp]# 

Usage:

[root@buildhost-64 tmp]# ./testrun.sh /tmp/transitRPMs
warning: /tmp/transitRPMs/alsa-lib-1.0.17-1.el5.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID e8562897
Preparing...                ########################################### [100%]
[root@buildhost-64 tmp]#

createrepo.sh (Used to create repository)

[root@buildhost-64 tmp]# cat createrepo.sh 
#!/bin/bash
BUILDDIR=$1
if [ "${BUILDDIR}" == "" ]; then
  echo "Build Directory cannot be empty. Please specify full path."
  exit 1
fi

COMPSFILE="/tmp/comps.xml-hypervisor"

export DISCINFO=$(head -1 ${BUILDDIR}/.discinfo)

echo "Doing: rm -f ${BUILDDIR}/repodata/*"
rm -f ${BUILDDIR}/repodata/* 

echo "Doing: cp -v ${COMPSFILE} ${BUILDDIR}/repodata/comps.xml"
cp -v ${COMPSFILE} ${BUILDDIR}/repodata/comps.xml 

echo "Doing: createrepo -u "media://${DISCINFO}" -g ${BUILDDIR}/repodata/comps.xml ${BUILDDIR}/"
createrepo  -u "media://${DISCINFO}" -g ${BUILDDIR}/repodata/comps.xml ${BUILDDIR}/
[root@buildhost-64 tmp]# 

Usage:

[root@buildhost-64 tmp]# ./createrepo.sh /mnt/cdimages/CentOS-5.5-x86_64-hypervisor
Doing: rm -f /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/repodata/*
Doing: cp -v /tmp/comps.xml-hypervisor /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/repodata/comps.xml
`/tmp/comps.xml-hypervisor' -> `/mnt/cdimages/CentOS-5.5-x86_64-hypervisor/repodata/comps.xml'
Doing: createrepo -u media://1272326751.405938 -g /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/repodata/comps.xml /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/
371/371 - CentOS/libgnomeui-2.16.0-5.el5.x86_64.rpm                             
Saving Primary metadata
Saving file lists metadata
Saving other metadata
[root@buildhost-64 tmp]# 

buildiso.sh (Used to build the ISO file)

[root@buildhost-64 tmp]# cat buildiso.sh 
#!/bin/bash
BUILDDIR=$1
if [ "${BUILDDIR}" == "" ]; then
  echo "Build Directory cannot be empty. Please specify full path."
  exit 1
fi
ISODIR="/mnt/cdimages/"
ISOFILE="CentOS-5.5-x86_64-HypervisorEdition.iso"

# Remove the non-english RELEASE-NOTES. 
rm -f ${BUILDDIR}/RELEASE-NOTES-[a-d,f-z]*

# Remove NOTES directory, which contains RELEASE-NOTES in plathora of different languages.
rm -f ${BUILDDIR}/NOTES*

# Remove the target ISO file, if it already exists.
rm ${ISODIR}/${ISOFILE}

# [OPTIONAL] Create the README file in the CD root:
cat > ${BUILDDIR}/README << EOFREADME
################################################################################################
# README  : Contains summary about this CD
# Author  : Muhammad Kamran Azeem (kamran@wbitt.com)
# Created : 20110103
# Revision: 20110103
# Summary : This CD is CENTOS 5.5 x86_64 (64 bit), rebuilt by WBITT team, as Hypervisor Edition.
#################################################################################################
Detail:-
1) This is a bootable CD. (Of-course ;)
2) The CD contains four groups only: 
* core [Not visible in installer.]
* base
* xen (Named/shown as group: Virtualization)
* kvm (Named/shown as group: KVM)

3) These groups can be used in your kickstart files.
4) The groups are designed in such a way, that if you do not select any group (uncheck all of them at the time of installation), 
you will get a minimal installation, containing yum and wget. In minimal install you won't get any protection. 
5) SELINUX and IPTABLES are not installed in the minimal (@core) installation.
all other packages if needed must be copied, or installed from the CD directly.
Or whatever way you prefer, including, but not limiting to using YUM.
6) The base contains xterm. If you select that, xterm and its (minimal) necessary X packages will also get installed automatically. (Vesa drivers)
7) If you decide to use kickstart, then please note, that the software in this CD is (should be) compatible with your current kickstarts.
8) The complete CD can be copied to an NFS/HTTP/FTP server, and can in-turn be used for network based installations, of the same.
9) The CD has both KVM and XEN hypervisors. Includes kernel-xen. 
10) If you select the category "Virtualization" at the install time, and do not check "customize software selection", XEN will be installed.

End of README file.
EOFREADME

# [OPTIONAL] Create a sample kickstart file in the CD root:
cat > ${BUILDDIR}/sample-kickstart.ks << EOFKS
################################################################################################
# Author : Muhammad Kamran Azeem (kamran@wbitt.com)
# Created: 2011-01-03
# Revised: 2011-01-03
# Summary: A minimalistic kickstart file by WBITT Team
# Note   : USE AT YOUR OWN RISK. Adjust as per your requirements.
################################################################################################
install
text
# url --url http://192.168.122.1/CentOS-5.5-x86_64-Hypervisor/
lang en_US.UTF-8
keyboard us
network --device eth0 --bootproto dhcp --hostname centos-55-64-hypervisor --noipv6
# The password below is actually redhat
rootpw --iscrypted $1$Q6duWtpC$OcyfP8NCdH1EZBxHmM/tL0
firewall --enabled --port=22:tcp
authconfig --enableshadow --enablemd5
selinux --enabled
timezone Asia/Riyadh
# I prefer you create at least a 2 GB disk for the minimal install.
# Adjust the following three lines as needed.
# zerombr
# bootloader --location=mbr  --append=""
# clearpart --all --initlabel
# part / --fstype=ext3 --size=200 --grow
# part swap --fstype=swap --size=256
reboot

%packages
# The options for groups are: core, base, xen, kvm
@core

%post
# chkconfig --level 35 sendmail off
# chkconfig --level 35 cups off
EOFKS


# Finally, create the ISO.
mkisofs -r -R -J -T -v  \
   -no-emul-boot -boot-load-size 4 -boot-info-table \
   -V "CentOS-5.5-Hypervisor 64-bit" -p "KamranAzeem (kamran@wbitt.com)"  -A "CentOS-5.5-Hypervisor-Edition 64 bit-2011/01/03" \
   -b isolinux/isolinux.bin -c isolinux/boot.cat  -x "lost+found" \
   -o ${ISODIR}/${ISOFILE} ${BUILDDIR}

[root@buildhost-64 tmp]#

Usage:

[root@buildhost-64 tmp]# ./buildiso.sh /mnt/cdimages/CentOS-5.5-x86_64-hypervisor
INFO:	UTF-8 character encoding detected by locale settings.
	Assuming UTF-8 encoded filenames on source filesystem,
	use -input-charset to override.
mkisofs 2.01 (cpu-pc-linux-gnu)
Scanning /mnt/cdimages/CentOS-5.5-x86_64-hypervisor
Scanning /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/images
Scanning /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/images/pxeboot
Excluded: /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/images/pxeboot/TRANS.TBL
Scanning /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/images/xen
Excluded: /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/images/xen/TRANS.TBL
Excluded: /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/images/TRANS.TBL
Scanning /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/repodata
Excluded: /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/TRANS.TBL
Scanning /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/CentOS
Scanning /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/isolinux
Excluded: /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/isolinux/TRANS.TBL
Excluded by match: /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/isolinux/boot.cat
Using RPM_G000.;1 for  /RPM-GPG-KEY-CentOS-5 (RPM-GPG-KEY-beta)
Using RELEA000.;1 for  /RELEASE-NOTES-en (RELEASE-NOTES-en_US)
Using RELEA000.HTM;1 for  /RELEASE-NOTES-es.html (RELEASE-NOTES-en.html)
Using RELEA001.HTM;1 for  /RELEASE-NOTES-en.html (RELEASE-NOTES-en_US.html)
. . . 
. . . 
Using XORG_01V.RPM;1 for  /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/CentOS/xorg-x11-drv-digitaledge-1.1.0-1.1.x86_64.rpm (xorg-x11-drv-s3virge-1.9.1-2.1.x86_64.rpm)
Using XORG_01W.RPM;1 for  /mnt/cdimages/CentOS-5.5-x86_64-hypervisor/CentOS/xorg-x11-drv-s3virge-1.9.1-2.1.x86_64.rpm (xorg-x11-fonts-75dpi-7.1-2.1.el5.noarch.rpm)
Writing:   Initial Padblock                        Start Block 0
Done with: Initial Padblock                        Block(s)    16
Writing:   Primary Volume Descriptor               Start Block 16
Done with: Primary Volume Descriptor               Block(s)    1
. . . 
. . . 
Writing:   Extension record                        Start Block 92
Done with: Extension record                        Block(s)    1
Writing:   The File(s)                             Start Block 93
  2.07% done, estimate finish Tue Jan  4 11:47:07 2011
  4.13% done, estimate finish Tue Jan  4 11:47:07 2011
  6.20% done, estimate finish Tue Jan  4 11:47:07 2011
  8.26% done, estimate finish Tue Jan  4 11:47:19 2011
 10.32% done, estimate finish Tue Jan  4 11:47:16 2011
. . . 
. . . 
 94.97% done, estimate finish Tue Jan  4 11:47:47 2011
 97.04% done, estimate finish Tue Jan  4 11:47:47 2011
 99.11% done, estimate finish Tue Jan  4 11:47:46 2011
Total translation table size: 103926
Total rockridge attributes bytes: 44898
Total directory bytes: 71680
Path table size(bytes): 98
Done with: The File(s)                             Block(s)    241935
Writing:   Ending Padblock                         Start Block 242028
Done with: Ending Padblock                         Block(s)    150
Max brk space used 84000
242178 extents written (473 MB)
[root@buildhost-64 tmp]#

Complete list of RPMS (for our CENTOS 5.5 x86_64 Hypervisor Edition)

[root@buildhost-64 tmp]# ls  /mnt/cdimages/hypervisor-64/ | wc -l
327

[root@buildhost-64 tmp]# du -sh  /mnt/cdimages/hypervisor-64/ 
271M	/mnt/cdimages/hypervisor-64/
[root@buildhost-64 tmp]# ls -tr1 /mnt/cdimages/hypervisor-64/
alsa-lib-1.0.17-1.el5.x86_64.rpm
atk-1.12.2-1.fc6.x86_64.rpm
audiofile-0.2.6-5.x86_64.rpm
audit-libs-1.7.17-3.el5.x86_64.rpm
audit-libs-python-1.7.17-3.el5.x86_64.rpm
avahi-0.6.16-7.el5.x86_64.rpm
avahi-glib-0.6.16-7.el5.x86_64.rpm
basesystem-8.0-5.1.1.el5.centos.noarch.rpm
bash-3.2-24.el5.x86_64.rpm
binutils-2.17.50.0.6-14.el5.x86_64.rpm
bitmap-fonts-0.3-5.1.1.noarch.rpm
bitstream-vera-fonts-1.10-7.noarch.rpm
bridge-utils-1.1-2.x86_64.rpm
bzip2-1.0.3-4.el5_2.x86_64.rpm
bzip2-libs-1.0.3-4.el5_2.x86_64.rpm
cairo-1.2.4-5.el5.x86_64.rpm
celt051-0.5.1.3-0.el5.x86_64.rpm
centos-release-5-5.el5.centos.x86_64.rpm
centos-release-notes-5.5-0.x86_64.rpm
checkpolicy-1.33.1-6.el5.x86_64.rpm
chkconfig-1.3.30.2-2.el5.x86_64.rpm
chkfontpath-1.10.1-1.1.x86_64.rpm
coreutils-5.97-23.el5_4.2.x86_64.rpm
cpio-2.6-23.el5_4.1.x86_64.rpm
cpp-4.1.2-48.el5.x86_64.rpm
cracklib-2.8.9-3.3.x86_64.rpm
cracklib-dicts-2.8.9-3.3.x86_64.rpm
crontabs-1.10-8.noarch.rpm
cryptsetup-luks-1.0.3-5.el5.x86_64.rpm
cups-libs-1.3.7-18.el5.x86_64.rpm
cyrus-sasl-2.1.22-5.el5_4.3.x86_64.rpm
cyrus-sasl-lib-2.1.22-5.el5_4.3.x86_64.rpm
cyrus-sasl-md5-2.1.22-5.el5_4.3.x86_64.rpm
db4-4.3.29-10.el5.x86_64.rpm
dbus-1.1.2-14.el5.x86_64.rpm
dbus-glib-0.73-8.el5.x86_64.rpm
dbus-libs-1.1.2-14.el5.x86_64.rpm
dbus-python-0.70-9.el5_4.x86_64.rpm
desktop-backgrounds-basic-2.0-41.el5.centos.noarch.rpm
desktop-file-utils-0.10-7.x86_64.rpm
device-mapper-1.02.39-1.el5.x86_64.rpm
device-mapper-event-1.02.39-1.el5.x86_64.rpm
device-mapper-multipath-0.4.7-34.el5.x86_64.rpm
dhclient-3.0.5-23.el5.x86_64.rpm
diffutils-2.8.1-15.2.3.el5.x86_64.rpm
dmidecode-2.10-3.el5.x86_64.rpm
dmraid-1.0.0.rc13-63.el5.x86_64.rpm
dmraid-events-1.0.0.rc13-63.el5.x86_64.rpm
dnsmasq-2.45-1.1.el5_3.x86_64.rpm
docbook-dtds-1.0-30.1.noarch.rpm
e2fsprogs-1.39-23.el5.x86_64.rpm
e2fsprogs-libs-1.39-23.el5.x86_64.rpm
e4fsprogs-libs-1.41.9-3.el5.x86_64.rpm
elfutils-libelf-0.137-3.el5.x86_64.rpm
esound-0.2.36-3.x86_64.rpm
etherboot-zroms-kvm-5.4.4-13.el5.centos.x86_64.rpm
ethtool-6-4.el5.x86_64.rpm
expat-1.95.8-8.3.el5_4.2.x86_64.rpm
filesystem-2.4.0-3.el5.x86_64.rpm
findutils-4.2.27-6.el5.x86_64.rpm
fipscheck-1.2.0-1.el5.x86_64.rpm
fipscheck-lib-1.2.0-1.el5.x86_64.rpm
fontconfig-2.4.1-7.el5.x86_64.rpm
freetype-2.2.1-21.el5_3.x86_64.rpm
ftp-0.17-35.el5.x86_64.rpm
gamin-0.1.7-8.el5.x86_64.rpm
gawk-3.1.5-14.el5.x86_64.rpm
GConf2-2.14.0-9.el5.x86_64.rpm
gdbm-1.8.0-26.2.1.x86_64.rpm
glib2-2.12.3-4.el5_3.1.x86_64.rpm
glibc-2.5-49.x86_64.rpm
glibc-common-2.5-49.x86_64.rpm
gnome-keyring-0.6.0-1.fc6.x86_64.rpm
gnome-mime-data-2.4.2-3.1.x86_64.rpm
gnome-mount-0.5-3.el5.x86_64.rpm
gnome-python2-2.16.0-1.fc6.x86_64.rpm
gnome-python2-bonobo-2.16.0-1.fc6.x86_64.rpm
gnome-python2-desktop-2.16.0-3.el5.x86_64.rpm
gnome-python2-gconf-2.16.0-1.fc6.x86_64.rpm
gnome-python2-gnomekeyring-2.16.0-3.el5.x86_64.rpm
gnome-python2-gnomevfs-2.16.0-1.fc6.x86_64.rpm
gnome-vfs2-2.16.2-6.el5.x86_64.rpm
gnutls-1.4.1-3.el5_3.5.x86_64.rpm
grep-2.5.1-55.el5.x86_64.rpm
grub-0.97-13.5.x86_64.rpm
gtk2-2.10.4-20.el5.x86_64.rpm
gtk-vnc-0.3.8-3.el5.x86_64.rpm
gtk-vnc-python-0.3.8-3.el5.x86_64.rpm
gzip-1.3.5-11.el5.centos.1.x86_64.rpm
hal-0.5.8.1-59.el5.x86_64.rpm
hicolor-icon-theme-0.9-2.1.noarch.rpm
hmaccalc-0.9.6-3.el5.x86_64.rpm
hwdata-0.213.18-1.el5.1.noarch.rpm
info-4.8-14.el5.x86_64.rpm
initscripts-8.45.30-2.el5.centos.x86_64.rpm
iproute-2.6.18-11.el5.x86_64.rpm
iptables-1.3.5-5.3.el5_4.1.x86_64.rpm
iptraf-3.0.0-5.el5.x86_64.rpm
iputils-20020927-46.el5.x86_64.rpm
iscsi-initiator-utils-6.2.0.871-0.16.el5.x86_64.rpm
kbd-1.12-21.el5.x86_64.rpm
kernel-2.6.18-194.el5.x86_64.rpm
kernel-xen-2.6.18-194.el5.x86_64.rpm
keyutils-libs-1.2-1.el5.x86_64.rpm
kmod-kvm-83-164.el5.x86_64.rpm
kpartx-0.4.7-34.el5.x86_64.rpm
krb5-libs-1.6.1-36.el5_4.1.x86_64.rpm
kvm-83-164.el5.x86_64.rpm
kvm-qemu-img-83-164.el5.x86_64.rpm
kvm-tools-83-164.el5.x86_64.rpm
less-436-2.el5.x86_64.rpm
libacl-2.2.39-6.el5.x86_64.rpm
libart_lgpl-2.3.17-4.x86_64.rpm
libattr-2.4.32-1.1.x86_64.rpm
libbonobo-2.16.0-1.fc6.x86_64.rpm
libbonoboui-2.16.0-1.fc6.x86_64.rpm
libcap-1.10-26.x86_64.rpm
libcroco-0.6.1-2.1.x86_64.rpm
libdaemon-0.10-5.el5.x86_64.rpm
libdmx-1.0.2-3.1.x86_64.rpm
libdrm-2.0.2-1.1.x86_64.rpm
libevent-1.4.13-1.x86_64.rpm
libfontenc-1.0.2-2.2.el5.x86_64.rpm
libFS-1.0.0-3.1.x86_64.rpm
libgcc-4.1.2-48.el5.x86_64.rpm
libgcrypt-1.4.4-5.el5.x86_64.rpm
libglade2-2.6.0-2.x86_64.rpm
libgnome-2.16.0-6.el5.x86_64.rpm
libgnomecanvas-2.14.0-4.1.x86_64.rpm
libgnomeui-2.16.0-5.el5.x86_64.rpm
libgpg-error-1.4-2.x86_64.rpm
libgsf-1.14.1-6.1.x86_64.rpm
libgssapi-0.10-2.x86_64.rpm
libICE-1.0.1-2.1.x86_64.rpm
libIDL-0.8.7-1.fc6.x86_64.rpm
libjpeg-6b-37.x86_64.rpm
libnotify-0.4.2-6.el5.x86_64.rpm
libogg-1.1.3-3.el5.x86_64.rpm
libpcap-0.9.4-15.el5.x86_64.rpm
libpng-1.2.10-7.1.el5_3.2.x86_64.rpm
librsvg2-2.16.1-1.el5.x86_64.rpm
libselinux-1.33.4-5.5.el5.x86_64.rpm
libselinux-python-1.33.4-5.5.el5.x86_64.rpm
libselinux-utils-1.33.4-5.5.el5.x86_64.rpm
libsemanage-1.9.1-4.4.el5.x86_64.rpm
libsepol-1.15.2-3.el5.x86_64.rpm
libSM-1.0.1-3.1.x86_64.rpm
libsmi-0.4.5-2.el5.x86_64.rpm
libstdc++-4.1.2-48.el5.x86_64.rpm
libsysfs-2.0.0-6.x86_64.rpm
libtermcap-2.0.8-46.1.x86_64.rpm
libtiff-3.8.2-7.el5_3.4.x86_64.rpm
libusb-0.1.12-5.1.x86_64.rpm
libuser-0.54.7-2.1.el5_4.1.x86_64.rpm
libutempter-1.1.4-4.el5.x86_64.rpm
libvirt-0.6.3-33.el5.x86_64.rpm
libvirt-python-0.6.3-33.el5.x86_64.rpm
libvolume_id-095-14.21.el5.x86_64.rpm
libwnck-2.16.0-4.fc6.x86_64.rpm
libX11-1.0.3-11.el5.x86_64.rpm
libXau-1.0.1-3.1.x86_64.rpm
libXaw-1.0.2-8.1.x86_64.rpm
libXcursor-1.1.7-1.1.x86_64.rpm
libXdmcp-1.0.1-2.1.x86_64.rpm
libXext-1.0.1-2.1.x86_64.rpm
libXfixes-4.0.1-2.1.x86_64.rpm
libXfont-1.2.2-1.0.3.el5_1.x86_64.rpm
libXfontcache-1.0.2-3.1.x86_64.rpm
libXft-2.1.10-1.1.x86_64.rpm
libXi-1.0.1-4.el5_4.x86_64.rpm
libXinerama-1.0.1-2.1.x86_64.rpm
libxkbfile-1.0.3-3.1.x86_64.rpm
libxml2-2.6.26-2.1.2.8.x86_64.rpm
libxml2-python-2.6.26-2.1.2.8.x86_64.rpm
libXmu-1.0.2-5.x86_64.rpm
libXpm-3.5.5-3.x86_64.rpm
libXrandr-1.1.1-3.3.x86_64.rpm
libXrender-0.9.1-3.1.x86_64.rpm
libXres-1.0.1-3.1.x86_64.rpm
libxslt-1.1.17-2.el5_2.2.x86_64.rpm
libXt-1.0.2-3.2.el5.x86_64.rpm
libXTrap-1.0.0-3.1.x86_64.rpm
libXtst-1.0.1-3.1.x86_64.rpm
libXv-1.0.1-4.1.x86_64.rpm
libXxf86dga-1.0.1-3.1.x86_64.rpm
libXxf86misc-1.0.1-3.1.x86_64.rpm
libXxf86vm-1.0.1-3.1.x86_64.rpm
log4cpp-1.0-9.el5.x86_64.rpm
logrotate-3.7.4-9.x86_64.rpm
lvm2-2.02.56-8.el5.x86_64.rpm
m2crypto-0.16-6.el5.6.x86_64.rpm
MAKEDEV-3.23-1.2.x86_64.rpm
mcstrans-0.2.11-3.el5.x86_64.rpm
mesa-libGL-6.5.1-7.8.el5.x86_64.rpm
mesa-libGLU-6.5.1-7.8.el5.x86_64.rpm
mingetty-1.07-5.2.2.x86_64.rpm
mkinitrd-5.1.19.6-61.x86_64.rpm
mktemp-1.5-23.2.2.x86_64.rpm
module-init-tools-3.3-0.pre3.1.60.el5.x86_64.rpm
nash-5.1.19.6-61.x86_64.rpm
nc-1.84-10.fc6.x86_64.rpm
ncurses-5.5-24.20060715.x86_64.rpm
net-tools-1.60-81.el5.x86_64.rpm
nfs-utils-1.0.9-44.el5.x86_64.rpm
nfs-utils-lib-1.0.8-7.6.el5.x86_64.rpm
nmap-4.11-1.1.x86_64.rpm
notification-daemon-0.3.5-9.el5.x86_64.rpm
nspr-4.7.6-1.el5_4.x86_64.rpm
nss-3.12.3.99.3-1.el5.centos.2.x86_64.rpm
numactl-0.9.8-11.el5.x86_64.rpm
openjade-1.3.2-27.x86_64.rpm
openldap-2.3.43-12.el5.x86_64.rpm
opensp-1.5.2-4.x86_64.rpm
openssh-4.3p2-41.el5.x86_64.rpm
openssh-clients-4.3p2-41.el5.x86_64.rpm
openssh-server-4.3p2-41.el5.x86_64.rpm
openssl-0.9.8e-12.el5_4.6.x86_64.rpm
ORBit2-2.14.3-5.el5.x86_64.rpm
pam-0.99.6.2-6.el5_4.1.x86_64.rpm
pango-1.14.9-6.el5.centos.x86_64.rpm
parted-1.8.1-27.el5.x86_64.rpm
passwd-0.73-1.x86_64.rpm
pciutils-2.2.3-8.el5_4.x86_64.rpm
pcre-6.6-2.el5_1.7.x86_64.rpm
perl-5.8.8-27.el5.x86_64.rpm
pm-utils-0.99.3-10.el5.centos.x86_64.rpm
policycoreutils-1.33.12-14.8.el5.x86_64.rpm
popt-1.10.2.3-18.el5.x86_64.rpm
portmap-4.0-65.2.2.1.x86_64.rpm
procps-3.2.7-16.el5.x86_64.rpm
psmisc-22.2-7.x86_64.rpm
pycairo-1.2.0-1.1.x86_64.rpm
pygobject2-2.12.1-5.el5.x86_64.rpm
pygtk2-2.10.1-12.el5.x86_64.rpm
pygtk2-libglade-2.10.1-12.el5.x86_64.rpm
pyorbit-2.14.1-3.el5.x86_64.rpm
python-2.4.3-27.el5.x86_64.rpm
python-elementtree-1.2.6-5.x86_64.rpm
python-iniparse-0.2.3-4.el5.noarch.rpm
python-numeric-23.7-2.2.2.x86_64.rpm
python-sqlite-1.1.7-1.2.1.x86_64.rpm
python-urlgrabber-3.1.0-5.el5.noarch.rpm
python-virtinst-0.400.3-9.el5.noarch.rpm
qcairo-1.8.7.1-3.el5.x86_64.rpm
qffmpeg-libs-0.4.9-0.15.20080908.el5.x86_64.rpm
qpixman-0.13.3-4.el5.x86_64.rpm
qspice-libs-0.3.0-54.el5.x86_64.rpm
readline-5.1-3.el5.x86_64.rpm
redhat-logos-4.9.99-11.el5.centos.noarch.rpm
rootfiles-8.1-1.1.1.noarch.rpm
rpm-4.4.2.3-18.el5.x86_64.rpm
rpm-libs-4.4.2.3-18.el5.x86_64.rpm
rpm-python-4.4.2.3-18.el5.x86_64.rpm
rsync-2.6.8-3.1.x86_64.rpm
rsyslog-3.22.1-3.el5.x86_64.rpm
scrollkeeper-0.3.14-9.el5.x86_64.rpm
SDL-1.2.10-8.el5.x86_64.rpm
sed-4.1.5-5.fc6.x86_64.rpm
selinux-policy-2.4.6-279.el5.noarch.rpm
selinux-policy-targeted-2.4.6-279.el5.noarch.rpm
setools-3.0-3.el5.x86_64.rpm
setup-2.5.58-7.el5.noarch.rpm
sgml-common-0.6.3-18.noarch.rpm
sgpio-1.2.0_10-2.el5.x86_64.rpm
shadow-utils-4.0.17-15.el5.x86_64.rpm
shared-mime-info-0.19-5.el5.x86_64.rpm
sqlite-3.3.6-5.x86_64.rpm
startup-notification-0.8-4.1.x86_64.rpm
SysVinit-2.86-15.el5.x86_64.rpm
tar-1.15.1-30.el5.x86_64.rpm
tcl-8.4.13-4.el5.x86_64.rpm
tcpdump-3.9.4-15.el5.x86_64.rpm
tcp_wrappers-7.6-40.7.el5.x86_64.rpm
telnet-0.17-39.el5.x86_64.rpm
termcap-5.5-1.20060701.1.noarch.rpm
traceroute-2.0.1-5.el5.x86_64.rpm
ttmkfdir-3.0.9-23.el5.x86_64.rpm
tzdata-2010e-1.el5.noarch.rpm
udev-095-14.21.el5.x86_64.rpm
usermode-1.88-3.el5.2.x86_64.rpm
util-linux-2.13-0.52.el5_4.1.x86_64.rpm
vim-minimal-7.0.109-6.el5.x86_64.rpm
virt-manager-0.6.1-12.el5.x86_64.rpm
virt-viewer-0.0.2-3.el5.x86_64.rpm
vixie-cron-4.1-77.el5_4.1.x86_64.rpm
vnc-server-4.1.2-14.el5_3.1.x86_64.rpm
vte-0.14.0-2.el5.x86_64.rpm
wget-1.11.4-2.el5_4.1.x86_64.rpm
which-2.16-7.x86_64.rpm
wireshark-1.0.8-1.el5_3.1.x86_64.rpm
xen-3.0.3-105.el5.x86_64.rpm
xen-libs-3.0.3-105.el5.x86_64.rpm
xkeyboard-config-0.8-9.el5.noarch.rpm
xml-common-0.6.3-18.noarch.rpm
xorg-x11-drivers-7.1-4.2.el5.x86_64.rpm
xorg-x11-drv-acecad-1.1.0-2.1.x86_64.rpm
xorg-x11-drv-aiptek-1.0.1-2.x86_64.rpm
xorg-x11-drv-ast-0.89.9-1.el5.x86_64.rpm
xorg-x11-drv-ati-6.6.3-3.27.el5.x86_64.rpm
xorg-x11-drv-calcomp-1.1.0-1.1.x86_64.rpm
xorg-x11-drv-cirrus-1.1.0-2.fc6.x86_64.rpm
xorg-x11-drv-citron-2.2.0-1.1.x86_64.rpm
xorg-x11-drv-digitaledge-1.1.0-1.1.x86_64.rpm
xorg-x11-drv-dmc-1.1.0-2.x86_64.rpm
xorg-x11-drv-dummy-0.2.0-2.1.x86_64.rpm
xorg-x11-drv-dynapro-1.1.0-2.x86_64.rpm
xorg-x11-drv-elo2300-1.1.0-1.1.x86_64.rpm
xorg-x11-drv-elographics-1.1.0-1.1.x86_64.rpm
xorg-x11-drv-evdev-1.0.0.5-5.el5.x86_64.rpm
xorg-x11-drv-fbdev-0.3.0-3.x86_64.rpm
xorg-x11-drv-fpit-1.1.0-1.1.x86_64.rpm
xorg-x11-drv-hyperpen-1.1.0-2.x86_64.rpm
xorg-x11-drv-i810-1.6.5-9.36.el5.x86_64.rpm
xorg-x11-drv-jamstudio-1.1.0-1.1.x86_64.rpm
xorg-x11-drv-joystick-1.1.0-1.1.x86_64.rpm
xorg-x11-drv-keyboard-1.1.0-3.x86_64.rpm
xorg-x11-drv-magellan-1.1.0-1.1.x86_64.rpm
xorg-x11-drv-magictouch-1.0.0.5-2.1.x86_64.rpm
xorg-x11-drv-mga-1.4.10-7.el5.x86_64.rpm
xorg-x11-drv-microtouch-1.1.0-1.1.x86_64.rpm
xorg-x11-drv-mouse-1.1.1-1.1.x86_64.rpm
xorg-x11-drv-mutouch-1.1.0-3.x86_64.rpm
xorg-x11-drv-nv-2.1.15-3.el5.x86_64.rpm
xorg-x11-drv-palmax-1.1.0-1.1.x86_64.rpm
xorg-x11-drv-penmount-1.1.0-2.1.x86_64.rpm
xorg-x11-drv-qxl-0.0.12-1.2.el5.x86_64.rpm
xorg-x11-drv-s3-0.4.1-2.1.x86_64.rpm
xorg-x11-drv-s3virge-1.9.1-2.1.x86_64.rpm
xorg-x11-drv-savage-2.1.1-5.fc6.x86_64.rpm
xorg-x11-drv-siliconmotion-1.4.1-2.1.x86_64.rpm
xorg-x11-drv-sis-0.9.1-7.1.el5.x86_64.rpm
xorg-x11-drv-sisusb-0.8.1-4.1.x86_64.rpm
xorg-x11-drv-spaceorb-1.1.0-1.1.x86_64.rpm
xorg-x11-drv-summa-1.1.0-1.1.x86_64.rpm
xorg-x11-drv-tdfx-1.2.1-3.1.x86_64.rpm
xorg-x11-drv-tek4957-1.1.0-1.1.x86_64.rpm
xorg-x11-drv-trident-1.2.1-3.fc6.x86_64.rpm
xorg-x11-drv-ur98-1.1.0-1.1.x86_64.rpm
xorg-x11-drv-vesa-1.3.0-8.2.el5.x86_64.rpm
xorg-x11-drv-vga-4.1.0-2.1.x86_64.rpm
xorg-x11-drv-via-0.2.1-9.x86_64.rpm
xorg-x11-drv-vmmouse-12.4.0-2.1.x86_64.rpm
xorg-x11-drv-vmware-10.13.0-2.1.x86_64.rpm
xorg-x11-drv-void-1.1.0-3.1.x86_64.rpm
xorg-x11-drv-voodoo-1.1.0-3.1.x86_64.rpm
xorg-x11-filesystem-7.1-2.fc6.noarch.rpm
xorg-x11-fonts-100dpi-7.1-2.1.el5.noarch.rpm
xorg-x11-fonts-75dpi-7.1-2.1.el5.noarch.rpm
xorg-x11-fonts-base-7.1-2.1.el5.noarch.rpm
xorg-x11-fonts-ISO8859-1-100dpi-7.1-2.1.el5.noarch.rpm
xorg-x11-fonts-ISO8859-1-75dpi-7.1-2.1.el5.noarch.rpm
xorg-x11-fonts-misc-7.1-2.1.el5.noarch.rpm
xorg-x11-fonts-truetype-7.1-2.1.el5.noarch.rpm
xorg-x11-fonts-Type1-7.1-2.1.el5.noarch.rpm
xorg-x11-font-utils-7.1-2.x86_64.rpm
xorg-x11-server-utils-7.1-4.fc6.x86_64.rpm
xorg-x11-server-Xorg-1.1.1-48.76.el5.x86_64.rpm
xorg-x11-twm-1.0.1-3.1.x86_64.rpm
xorg-x11-utils-7.1-2.fc6.x86_64.rpm
xorg-x11-xauth-1.0.1-2.1.x86_64.rpm
xorg-x11-xdm-1.0.5-7.el5.x86_64.rpm
xorg-x11-xfs-1.0.2-4.x86_64.rpm
xorg-x11-xinit-1.0.2-15.el5.x86_64.rpm
xorg-x11-xkb-utils-1.0.2-2.1.x86_64.rpm
xterm-215-8.el5_4.1.x86_64.rpm
xz-libs-4.999.9-0.3.beta.20091007git.el5.x86_64.rpm
yum-3.2.22-26.el5.centos.noarch.rpm
yum-fastestmirror-1.1.16-14.el5.centos.1.noarch.rpm
yum-metadata-parser-1.1.2-3.el5.centos.x86_64.rpm
zip-2.31-2.el5.x86_64.rpm
zlib-1.2.3-3.x86_64.rpm
[root@buildhost-64 tmp]#

Screen Shots

File:Test-hypervisor-Virtual Machine-1.png

File:Test-hypervisor-Virtual Machine-2.png

File:Test-hypervisor-Virtual Machine-3.png

File:Test-hypervisor-Virtual Machine-4.png

Download the ISO (473 MB)

Built on: 04 Jan 2011 http://downloads.wbitt.com/downloads/CentOS-5.5-x86_64-HypervisorEdition.iso (473 MB)

MD5SUM  : adae0a1dd92adcf52caf1afd7104c0b3

SHA1SUM : a08c200d97f700025d33ee848384a8d573510453

Personal tools